As clean as necessary, as gentle as possible
In the plastics industry, components and semi-finished products can become contaminated on their surfaces during production – for example, by residues from mould release agents or separating agents. Such residues impair subsequent processes that directly affect the surface, such as printing, painting or bonding. The new LIBS-OF project aims to clean, analyse and activate surfaces inline in a single process step. Interested companies are cordially invited to attend the first committee meeting in September.
In the newly launched IGF project LIBS-OF, the SKZ plastics centre is focusing on the combination of laser-induced plasma spectroscopy (LIBS) and laser ablation for cleaning, pre-treatment and quality assurance of plastic surfaces.
An ultraviolet (UV) laser with a wavelength of 193 nanometres is used for particularly effective cleaning. This short wavelength makes it possible to break bonds between carbon and silicon atoms. This allows even stubborn contaminants – such as silicone release agents – to be removed, where conventional cleaning methods reach their limits.
In addition, the plastic surface is chemically functionalised under the influence of atmospheric oxygen. This produces -OH or other polar groups, for example, which become firmly anchored to the surface. This activation ensures that subsequent processes such as bonding or coating can be carried out immediately after the laser LIBS treatment.
The treatment of surfaces with high-energy lasers carries the risk of over-treatment. Excessive processing can be particularly problematic in fibre composite technology: if the reinforcing fibre is exposed on the surface – for example in carbon fibre reinforced plastic (CFRP) components – there is a risk of oxidative damage. This can lead to increased scrap rates and, in the worst case, component failure during use.
To avoid both under- and over-treatment, the cleaning and activation process is monitored inline using laser-induced plasma spectroscopy. The analysis results control the process parameters in real time. This achieves high cleaning performance, avoids over-treatment and saves process time at the same time.
The SKZ invites you to the digital kick-off of the IGF project LIBS-OF on 25 September 2025. Interested companies are welcome to contact Stefanie Grunert.
The LIBS-OF project (funding number 01IF23668N) will run from 1 March 2025 to 28 February 2027 and is funded by the DLR Project Management Agency (Society, Innovation, Technology) and the Federal Ministry for Economic Affairs and Energy (BMWE).
Über FSKZ e. V.
The SKZ is a climate protection company and a member of the Zuse Association. This is an association of independent, industry-related research institutions that pursue the goal of improving the performance and competitiveness of industry, especially SMEs, through innovation and networking.
Firmenkontakt und Herausgeber der Meldung:
FSKZ e. V.
Friedrich-Bergius-Ring 22
97076 Würzburg
Telefon: +49 931 4104-0
https://www.skz.de
Ansprechpartner:
Pia Lehnfeld
Presse- und Öffentlichkeitsarbeit
Telefon: +49 931 4104-197
E-Mail: p.lehnfeld@skz.de
Presse- und Öffentlichkeitsarbeit
Telefon: +49 931 4104-197
E-Mail: p.lehnfeld@skz.de
Weiterführende Links
Für die oben stehende Story ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.
