Ticking time bomb in water pipes

Whether it’s industrial plants, office complexes, hotels, or hospitals – water pipes are used everywhere for drinking water supply, heating, cooling, and industrial processes. However, many pipe installations are threatened by an often undetected danger: deposits inside the pipes, so-called incrustations.

This can lead to complete blockages of pipes, resulting in expensive consequential damage – even to the bursting of the pipe. The more advanced an incrustation is, the more difficult it is to remove. The damage is inevitably pre-programmed. It is therefore important to check pipe systems regularly and, if necessary, have them replaced before it is too late.

Incrustation refers to deposits that form inside water pipes. Metallic pipe systems are particularly affected, as they are more susceptible to deposits due to their surface properties. These can remain undetected for a long time and then lead to pipe breakage or leaks due to the increasing pressure in the pipe system. In the worst case, this damage can lead to complete production stoppages in industrial plants and bring operations to a standstill in hotels, hospitals, or other large buildings.

How does incrustation occur in water pipes?

The formation of incrustations is complex and depends on various factors. The most common cause of incrustation are minerals, such as magnesium and calcium, which are present in the water. The hardness of the water depends on the region and varies depending on the occurrence of limestone, dolomite rock or gypsum rock. As long as the deposit remains thin, like a layer of lime on the pipe wall, there is no danger. However, if the incrustation in the pipe increases unnoticed for a long time, expensive consequential damage can occur.

If there is a constant drop in pressure in the systems or the consumers, incrustation may be the cause. Limescale deposits at the tapping points can also be an indication that pipes are calcified.

Why are plastic pipes hardly affected by incrustation?

Due to their smooth surface and chemical resistance, plastic pipes are hardly susceptible to deposits or incrustations compared to metal pipes. The smooth surface minimises the adhesion of particles which prevents deposits in the pipes. In addition, plastics do not incrust, as they are not electrically conductive, so the ions or particles dissolved in the water do not adhere to the pipe wall.

Another advantage of plastic pipes is that they are corrosion resistant. With metallic systems, corrosion damage can occur in connection with deposits. Plastic pipes are also more resistant to chemical substances, which can be used for hygienic pipe cleaning, for example, without attacking the pipe wall.

An example from practice

Incrustation and sludge formation had taken their toll on the steel pipes of an industrial company. A crystal crust had formed on the inside, which caused the inner diameter of the pipes to slowly grow too large due to corrosion. The inner diameter of the DN 100 steel pipes had been reduced by almost half. The pipes were replaced with aquatherm products. Thanks to the plastic polypropylene, these are resistant to corrosion and incrustation.

Under the name fusiolen® aquatherm develops and produces innovative polypropylene materials. These are characterised, among other things, by their special high-heat and extraction stability. The physical and chemical properties are adapted to the special requirements of the respective field of application. Due to the good welding properties, the pipe and fitting merge into a homogeneous, materially bonded unit.

Über die aquatherm GmbH

aquatherm is the world’s leading manufacturer of plastic piping systems made of polypropylene for plant construction and building services. Areas of application include drinking water applications, heating system construction, fire protection sprinkler systems, air conditioning and refrigeration technology as well as surface heating and cooling systems. The range comprises more than 17,000 articles in six product lines.

In order to guarantee the worldwide availability of the products and to offer local service, aquatherm works closely together with long-term partners in more than 70 countries around the globe. The company employs about 500 people in Germany, Italy, England, USA and Canada. Production takes place exclusively at the German sites in Attendorn (headquarters), Radeberg and Ennest. Therefore, customers all over the world can rely on innovative and safe PP-R piping systems of the highest quality “100% Made in Germany”. Today, the family business is managed in the second generation by the brothers Christof, Dirk and Maik Rosenberg.

Firmenkontakt und Herausgeber der Meldung:

aquatherm GmbH
Biggen 5
57439 Attendorn
Telefon: +49 (2722) 950-0
Telefax: +49 (2722) 950-100
http://www.aquatherm.de

Ansprechpartner:
Nicola Holweg
Referentin für Presse- und Öffentlichkeitsarbeit
Telefon: +49 (2722) 950-202
E-Mail: nicola.holweg@aquatherm.de
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.

counterpixel