11 overhead cranes manufactured by LEVELEC, a member of the Verlinde network, are installed in COMEGE’s new workshops

LEVELEC has designed and manufactured 11 overhead cranes, delivered with environment-friendly Verlinde lifting equipment for COMEGE, a gantry crane, jib crane and lifting beam manufacturer for its new plant. These cranes, some of which have a load-bearing capacity of 6.3 tonnes, are designed for handling crude products and the shipment of finished products. Levélec and COMEGE have been VERLINDE’s partners for many years as Levélec has been a member of Verlinde’s EUROPONT network and after sales service since 1974.

Located in the administrative department of Saône et Loire, roughly 100 k from Lyon, the speciality of COMEGE, a family business with 50 employees, is the design and production of standard or customized lifting equipment for any type of industry. Set up in 1984, its range of activities at that time targeted sheet metal manufacturers. 1992 marked the year when the range of products widened to include jib cranes, gantry cranes and lifting beams.

LEVELEC, based at Vaulx en Velin near Lyon, is a specialist manufacturer of EUROPONT overhead cranes (standard and customized) together with associated runways. Another of its specialities is the repair and routine maintenance of lifting equipment and the company has belonged to VERLINDE’s official after-sales servicing network since it was set up in 1974.

COMEGE has a permanent on-site stock of parts used for its most frequent operations providing it great reactivity to the requirements of customers. 60% of production is currently consecrated to catalogue-listed equipment and 40% to customized equipment. The whole production is for the resale trade.

A new 11,000 m2 building had to be equipped

To meet their increasing need for more significant production resources, COMEGE in 2018 decided to consolidate its production facilities in a new building measuring 11,000 m2. The location of production and design / engineering on the same site is a big advantage for the company. "The skills of our design and engineering department are widely acknowledged due to close collaboration with the production workshop and this lasts throughout the manufacturing process. It is also a reliable and conscientious point of contact for our sales partners. " declares a COMEGE source. To fit out the new building, COMEGE called upon LEVELEC of EUROPONT to make and deliver 11 overhead cranes equipped with VERLINDE lifting equipment. The order was divided into three types of cranes with loading capacities of 2 tonnes for a span of 15 m, 5 tonnes and 6.3 tonnes for a span of 25 m.

Negotiations started in March 2018, well before the construction of the building. There were therefore no assembly constraints. COMEGE expressed its wish for environment-friendly equipment. With this in mind, LEVELEC suggested VERLINDE’s EUROBLOC VT range of wire rope hoists for loads of from 800 kg to 80,000 kg. These hoists have motors with variable speed drive that adjusts to fit the load. The system consumes energy focused on each load individually enabling substantial energy savings. This means a fast return on investment which was intrinsic to COMEGE’s specification sheet.

Very rapid shipment and assembly

The project was given the green light in June 2018 with funding that integrated environmental concerns. The equipment was installed in September 2019 following the construction of the building enabling production start-up in January 2020.

The cranes were transported and delivered on site in no more than 24 hours in September 2019. A special convoy was organized for the purpose. Installation was successfully completed with no difficulties encountered. The production facilities currently operate as planned.

Firmenkontakt und Herausgeber der Meldung:

Verlinde
2, boulevard de l’Industrie
F28509 Vernouillet cedex
Telefon: +33 (2) 37389595
Telefax: +33 (2) 37389599
http://www.verlinde.fr

Ansprechpartner:
Jean-Yves Beaussart
VERLINDE
Telefon: +33 (2) 373896-26
E-Mail: jean-yves.beaussart@verlinde.com
Emmanuel Ahossi
MEPAX
Telefon: +34 (655) 783-193
E-Mail: e.ahossi@mepax.com
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.

counterpixel